01 Answer first
How should ozone or UV be integrated into a water bottling treatment system?
Start with a qualified treatment objective, then define actual water and flow inputs, hydraulic location, contact conditions, monitoring, alarms, product-status response, worker safety, maintenance, validation evidence, and revalidation triggers.
02 Where it fits
Position in the project journey
Treatment and safety definition — before ozone or UV equipment and control release.
03 Buyer inputs
What the buyer should prepare
- Qualified treatment and validation basis
- Local worker-safety and regulatory review
- Product-status and laboratory procedures
04 Allot Tech and manufacturing-resource inputs
What should be clarified or provided
- Equipment operating envelope
- Hydraulic, instrument, and control interfaces
- Maintenance and test information
Allot Tech coordinates requirement, quotation and project communication. Detailed engineering, manufacture, testing, documentation and confirmed service are performed by selected manufacturing resources according to the signed scope.
05 Technical scope
Questions and work to control
State the Approved Treatment Objective
Define what each selected technology is intended to control, at which process location, for which water condition, and within which qualified treatment plan.
Provide Project-Specific Design Inputs
Use source and treated-water characteristics, flow modes, UV transmittance where relevant, ozone demand, temperature, contact arrangement, and equipment operating range.
Define Hydraulic and Contact Interfaces
Coordinate injection or reactor location, mixing, contact vessel, recirculation, off-gas, vent, pressure, bypass control, drains, and downstream exposure.
Set Monitoring and Instrument Interfaces
Qualified parties should define measured variables, sample points, instruments, calibration, alarms, trends, laboratory checks, and the evidence used for product-status decisions.
Control Permissives and Failure Modes
Define behavior for low flow, lamp or generator fault, unsuitable water condition, sensor fault, ventilation loss, tank status, filler stop, and restoration.
Address Worker and Area Safety
Qualified local safety design should cover exposure assessment, ventilation, detection where required, access, signage, interlocks, maintenance isolation, and emergency response.
Plan Cleaning, Replacement, and Verification
Include sleeves or contact surfaces, generator parts, lamps, seals, filters, calibration, cleaning materials, replacement records, and return-to-service checks.
Validate the Installed Treatment Step
Use an approved project protocol that links actual water, flow, equipment condition, monitoring, sampling, acceptance decisions, deviations, and revalidation triggers.
Buyer questions answered
Practical answers before you request a quotation
Are ozone and UV interchangeable?
No. Their roles, design inputs, monitoring, residual behavior, limitations, and safety interfaces differ by process.
Can a catalog dose or rating define the project?
No. Qualified design should use the actual water, flow, treatment objective, equipment arrangement, and validation basis.
Who approves safety controls?
Qualified local occupational-safety, electrical, process, and facility professionals should confirm applicable controls.
06 Responsibility
Assign the owner before the work is due
Land, building and civil work, permits, import and customs, local taxes, site utilities, unloading, lifting, local labor, travel support and commissioning materials are not automatically included. Confirm every responsibility before order.
07 Common risks
What commonly creates avoidable uncertainty
- Technology is selected without a defined objective
- Sensor faults have no product-status response
- Exposure and ventilation interfaces are left to startup
08 Acceptance or completion
How to know the stage is complete
Approve when treatment purpose, design inputs, safety, controls, monitoring, validation, and failure response are owned and evidence-linked.
09 Required documents
Records that support the decision
- Treatment integration specification
- Safety and control narrative
- Validation protocol
10 Next project step
Turn this decision into a reviewable project brief
Share the product, container, target output, destination and available site information. Unknown inputs can remain open for the first review.
Turnkey scope is project-specific and is defined by the signed technical and commercial agreement.